Technical Specifications
Specification Reference by Product Family & Engineering Discipline
Technical specifications define the performance envelope within which a product or system operates. This reference page organises key parameters by product family. Published values reflect typical product specifications — project-specific configuration, mounting orientation, duty cycle, and ambient conditions affect actual performance. Consult our engineering team for application-specific sizing.
Important: Specifications published here are representative of typical product performance. Actual performance depends on mounting configuration, duty cycle, load spectrum, ambient temperature, and system integration. All values must be verified against manufacturer datasheets for the specific model. INDUS engineers provide application-specific sizing calculations on request.
Precision Reducers
Precision Reducer Specifications
| Parameter | Harmonic (Strain-Wave) | Cycloidal (RV) | Planetary | Notes |
|---|---|---|---|---|
| Gear Ratio Range | 30:1 – 160:1 | 31:1 – 192:1 | 3:1 – 100:1 | Standard catalogue ratios |
| Backlash (Lost Motion) | < 1 arcmin | < 1 arcmin | 1–3 arcmin (std) / < 1 (precision) | At rated preload |
| Torsional Rigidity | High (flexspline compliance) | Very High | Medium-High | Application-dependent |
| Shock Load Capacity | 3× rated torque (peak) | 5× rated torque (peak) | 2× rated torque | Momentary transient |
| Lubrication | Grease (sealed) | Oil bath or grease | Grease (sealed) | Check OEM intervals |
| Operating Temperature | -10°C to +40°C | -10°C to +40°C | -20°C to +60°C | Ambient, unventilated |
| Feedback Mounting | Hollow bore (standard) | Solid or hollow | Solid or hollow | Per joint design |
| Applicable Standard | ISO 9283 | ISO 9283 | ISO 9283 | Kinematic accuracy |
Exact values vary by model and ratio. Request the relevant manufacturer datasheet for your specific model number.
Servo Drives & Controllers
Servo Drive & Controller Specifications
| Parameter | Compact Joint Drives | Multi-Axis EtherCAT Drives | Notes |
|---|---|---|---|
| Supply Voltage | 24–48 VDC | 230/400 VAC (3-phase) | Nominal |
| Continuous Current | 5–30 A | 3–120 A per axis | RMS |
| Peak Current | Up to 3× continuous | Up to 3× continuous | Brief transient |
| Communication | CANopen, EtherCAT | EtherCAT, PROFINET | Check model |
| Update Cycle | 1–4 ms | 0.25–1 ms | With EtherCAT DC |
| Safety Function | STO (SIL 2 / PLd) | STO, SLS, SS1 (SIL 3 / PLe) | IEC 62061 / ISO 13849 |
| Feedback Supported | Sin/Cos, EnDat 2.2 | EnDat 2.2, HIPERFACE, Biss-C | Per axis |
Verify compatibility with your specific motor, encoder, and safety controller before ordering.
Linear Motion
Linear Guidance & Actuator Specifications
| Parameter | Ball Screw Actuators | Linear Guideways | Notes |
|---|---|---|---|
| Load Capacity | 1 kN – 40 kN (depends on diameter/lead) | 2 kN – 120 kN (depends on size) | Static rated load |
| Accuracy Grade | C3 / C5 ground | Grade H/P | ISO 3408 / ISO 9285 |
| Lead Range | 5–50 mm/rev | N/A | Standard catalogue |
| Max Speed | 1 m/s (depends on lead and RPM) | Up to 5 m/s (linear motor) | Application-dependent |
| Backlash | < 0.01 mm (preloaded) | N/A | With preloaded nut |
| Stroke Range | Custom (up to ~4 m) | Standard lengths | Project-specific |
Operating speeds, load ratings, and stroke lengths depend on mounting configuration, preload class, and lubrication schedule.
Robotic Systems
Robotic System Performance Parameters
| Parameter | Collaborative Arms (Cobots) | Industrial 6-Axis Articulated | SCARA | Delta |
|---|---|---|---|---|
| Payload | 3–35 kg | 3–800 kg | 1–20 kg | 1–8 kg |
| Reach | 500–1500 mm | 500–4000 mm | 300–1200 mm | 400–1500 mm |
| Repeatability (ISO 9283) | ±0.03–0.1 mm | ±0.02–0.1 mm | ±0.01–0.02 mm | ±0.05–0.1 mm |
| TCP Speed | Up to 2.5 m/s | Up to 3 m/s | Up to 10 m/s | Up to 10 m/s |
| Degrees of Freedom | 6 | 6 | 4 | 3–4 |
| Ingress Protection | IP54 (std) / IP67 (wash) | IP54 / IP67 / IP69K | IP54 / IP65 | IP54 |
Exact specifications depend on manufacturer, model, and configuration. INDUS supplies application-specific system configurations.
Environmental & Safety
Environmental Limits & Safety Standards
Ambient Temperature (operation)
Typically -10°C to +45°C (product dependent)
Humidity
Typically 10–95% RH non-condensing
IP Rating
IP54 standard; IP65/67/69K on sealed variants — verify per product
Vibration
Per IEC 60068-2-6 (product-specific test levels)
EMC
CE marked products comply with IEC 61000-4 series (verify scope)
Functional Safety
ISO 13849-1, IEC 62061, IEC 61508 — applicable standard depends on product
Collaborative Robot Safety
ISO/TS 15066 (power & force limits for cobot applications)
Industrial Robot Safety
ISO 10218-1 (robot) and ISO 10218-2 (integration)
Important: Safety standard compliance must be verified for the complete system, not individual components. INDUS engineering performs SISTEMA calculations and hazard assessments as part of engineering service engagements.
Application-Specific Engineering
Need Application-Specific Specifications?
Specifications on this page are representative reference values. For sizing calculations, motor selection, and validated performance analysis for your specific application, our engineering team provides traceable, calculation-backed recommendations.
Connected Ecosystem
Related Engineering Content
Engineering Services
- Engineering CapabilitiesEngineering Services
Overview of INDUS engineering disciplines: application feasibility, mechatronics, workcells, motion control, safety, and lifecycle optimization.
- CAD & DownloadsEngineering Reference
CAD models, technical drawings, and downloadable documentation for INDUS product families.
- Kinematic Sizing CalculatorsTechnology
Interactive tools for sizing joints, drives, and reducers based on your application torque, speed, and inertia targets.