Showing 566 Nodes Click to Inspect
ResearchSource verified
ISO 9283: Manipulating industrial robots — Performance criteria and related test methods Positional repeatability (RP), multi-directional path accuracy (AT), and pose stabilization time under rated payload.
ID: src:iso-9283-1998 ResearchSource verified
DIN 3990: Calculation of load capacity of cylindrical gears Bending fatigue limits, contact pitting stress safety factors, and scoring temperature flash limits for industrial reducers.
ID: src:din-3990-1987 ResearchSource verified
AGMA 6013-B16: Standard for Industrial Enclosed Gear Drives Service factor definitions, thermal dissipation equilibrium ratings, and overload shock ratings (up to 500% momentary stall).
ID: src:agma-6013-b16 ResearchSource verified
IEC 60034-1: Rotating electrical machines - Rating and performance Duty cycle classifications (S1 continuous through S8 periodic), temperature rise limits (Class F / Class H), and insulation breakdown.
ID: src:iec-60034-1-2022 ResearchSource verified
ISO 13849-1: Safety of machinery — Safety-related parts of control systems — General principles for design Performance Levels (PL a to PL e), Designated Architectures (Category B, 1, 2, 3, 4), and Mean Time to Dangerous Failure (MTTFd).
ID: src:iso-13849-1-2023 ResearchSource verified
IEC 62061: Safety of machinery - Functional safety of safety-related control systems Safety Integrity Levels (SIL 1, SIL 2, SIL 3) for programmable electronic safety systems and Safe Motion monitoring.
ID: src:iec-62061-2021 ResearchSource verified
ISO 10218-1 / ISO 10218-2: Robots and robotic devices — Safety requirements for industrial robots Robot construction safety rules, dual-channel interlocks, dynamic axis limiting, and safeguarding integration boundaries.
ID: src:iso-10218-1-2-2011 ResearchSource verified
ISO/TS 15066: Robots and robotic devices — Collaborative robots Biomechanic biomechanical limit values for transient and quasi-static contact across 29 body regions; power and force limiting (PFL).
ID: src:iso-ts-15066-2016 ResearchSource verified
ISO 9409-1: Manipulating industrial robots — Mechanical interfaces — Part 1: Plates Standardized robot tool flange bolt circles (ISO 50, ISO 63, ISO 9409-1-50-4-M6) and center locating boss dimensions.
ID: src:iso-9409-1-2004 ResearchSource verified
ISO 3408: Ball screws — Parts 1 to 5: Vocabulary, nominal dimensions, static and dynamic ratings, and acceptance conditions Lead accuracy grades (C1, C3, C5), preload definitions (2% to 10% dynamic capacity), and critical whirling speed limits.
ID: src:iso-3408-2006 ResearchSource verified
DIN 645: Rolling bearings — Profile rail guide systems with recirculating rolling elements Dynamic load rating C, static moment capacities (Mx, My, Mz), and running parallelism tolerances for 4-row linear ball and roller guides.
ID: src:din-645-linear-guides ResearchSource verified
IEEE 802.1Qbv: Enhancements for Scheduled Traffic (Time-Sensitive Networking) Time-aware shaper (TAS) cyclic gate scheduling, sub-microsecond packet delivery latency, and deterministic Ethernet bandwidth reservation.
ID: src:ieee-802-1qbv-tsn ResearchSource verified
IEC 61158: Industrial communication networks — Fieldbus specifications EtherCAT, PROFINET IRT, and EtherNet/IP CIP Sync protocols for real-time cyclic motion synchronization down to 250 µs.
ID: src:iec-61158-fieldbus ResearchSource verified
EMVA 1288: Standard for Characterization of Image Sensors and Cameras Quantum efficiency (QE), temporal dark noise, saturation capacity, dynamic range (dB), and signal-to-noise ratio (SNR) benchmarking.
ID: src:emva-1288-standard ResearchSource verified
Harmonic Drive Engineering & Selection Manual: Strain Wave Gearing Principles Zero backlash mechanism (< 0.1 arcmin), lost motion hysteresis measurement protocol, and single-stage ratio range (30:1 to 160:1).
ID: src:harmonic-drive-engineering-guide ResearchSource verified
Nabtesco Precision RV Reducer Technical Design Manual Two-stage cycloidal eccentric design, 500% emergency stop shock tolerance, and torsional rigidity exceeding 1,200 Nm/arcmin.
ID: src:nabtesco-precision-rv-catalogue ResearchSource verified
Wittenstein Alpha High Performance Planetary Gearbox Technical Guide Carburized and ground helical planetary gearing, sub-arcminute backlash (< 1 arcmin), and >97% full-load transmission efficiency.
ID: src:wittenstein-planetary-handbook ResearchSource verified
ETG.1000 EtherCAT Specification and Real-Time Motion Protocol Processing on the fly, distributed clocks synchronization jitter < 100 ns, and cyclic update rates down to 250 µs.
ID: src:beckhoff-etg1000-ethercat ResearchSource verified
SCHUNK Mechatronic Gripper and ISO 9409 End-Effector Integration Guide Electric servo gripping force control (±1 N), IO-Link communication, and ISO 9409-1 mechanical mounting interfaces.
ID: src:schunk-gripper-interface-standard ResearchSource verified
SICK Industrial Safety Laser Scanners — Principles and Safety Distances Optical time-of-flight safety scanning, 275° scanning angle, dynamic switching fields based on robot speed and payload envelope.
ID: src:sick-safety-laser-scanner-manual IntelligenceLevel verified
Level 0: Mechanical Transmission & Structural Rigidity Transmits mechanical power, scales rotational speed and torque, supports radial/axial shaft moments, and determines the fundamental geometric precision and mechanical backlash of the system without software intervention.
ID: intelligence:l0 IntelligenceLevel verified
Level 1: Actuation & Controlled Motion Converts electrical current into calibrated dynamic Lorentz magnetic forces. Closes inner high-speed current (torque) loops and commutates brushless motors using field-oriented control (FOC).
ID: intelligence:l1 IntelligenceLevel verified
Level 2: Sensing & State Feedback Measures true physical states (joint angles, gearbox output deflection, tool contact forces, motor winding temperatures, and line voltages) and converts analog physics into digital feedback packets.
ID: intelligence:l2 IntelligenceLevel verified
Level 3: Programmed Control & Coordinated Motion Computes 6-DOF forward and inverse kinematics, interpolates smooth linear/circular Cartesian paths, executes electronic camming, and coordinates multiple robot axes with microsecond-level synchronization.
ID: intelligence:l3 IntelligenceLevel verified
Level 4: Perception & Contextual Interpretation Extracts semantic meaning from high-dimensional sensor data (RGB cameras, structured light 3D cameras, LiDAR, and acoustic arrays). Identifies part location, class, orientation, defects, and obstacle boundaries.
ID: intelligence:l4 IntelligenceLevel verified
Level 5: Adaptive Planning & Autonomous Behaviour Generates real-time obstacle avoidance trajectories, computes whole-body balance and impedance adaptation, handles unexpected task exceptions, and orchestrates fleet missions autonomously without fixed human step-by-step programming.
ID: intelligence:l5 CompatibilityRule verified
Drivetrain Reflected Load Inertia Ratio Constraint Reflected load inertia to motor rotor inertia ratio (JL / JM) must not exceed 5:1 for high-cadence robotic joints.
ID: rule:inertia-ratio-dynamic CompatibilityRule verified
Strain-Wave Flexspline Impact Shock Incompatibility Standard cup strain-wave reducers must not be deployed on heavy impact stamping press loaders or high-shock forging manipulators.
ID: rule:strain-wave-overload-shock CompatibilityRule verified
RV Cycloidal High Torsional Rigidity Compatibility RV cycloidal reducers are recommended for base yaw (J1), shoulder pitch (J2), and elbow pitch (J3) on heavy-payload industrial robots.
ID: rule:rv-cycloidal-stiffness-high-load CompatibilityRule verified
EtherCAT Distributed Clocks Fieldbus Synchronization Coordinated multi-axis 6-DOF robot kinematics requires hardware-supported Distributed Clocks (DC) with synchronization jitter < 100 ns.
ID: rule:ethercat-dc-sync-sub-millisecond CompatibilityRule verified
ISO 9409-1 Robot Tool Flange Mechanical Mounting Compatibility End-of-arm tooling must match the standardized ISO 9409-1 mechanical flange pitch circle diameter and dowel locating pin.
ID: rule:iso-9409-end-effector-interface CompatibilityRule verified
ISO 13855 Optical Safeguard Separation Distance Constraint Protective field radius of safety laser scanners must account for robot maximum speed and complete emergency braking stopping distance.
ID: rule:safety-laser-scanner-stopping-distance CompatibilityRule verified
Vacuum Cleanroom Lubricant Outgassing Incompatibility Standard mineral-oil lubricated gearboxes must not be operated inside ISO Class 1 to 4 cleanrooms or high-vacuum wafer processing chambers.
ID: rule:semiconductor-cleanroom-outgassing CompatibilityRule verified
Time-Sensitive Networking (TSN) Bandwidth Allocation Compatibility GigE Vision uncompressed camera streams must be mapped to asynchronous traffic classes, preserving high-priority TSN time-slots for deterministic motion.
ID: rule:tsn-802-1qbv-bandwidth-guarantee ProductLine verified
Precision Reducers and Gearboxes Zero-backlash strain-wave, high-stiffness RV, helical planetary, and cycloidal gear units for robotic kinematics.
ID: line:precision-reducers ProductRange verified
IND-PR-SW100 Cup Component Set Provides maximum kinematic ratio in the smallest possible internal volume by integrating directly into custom robot link castings.
ID: range:ind-pr-sw-cup-set ProductRange verified
IND-PR-SW200 Hollow-Bore Gear Unit Facilitates internal passage of electrical cabling, pneumatic air lines, laser fiber, and coolant hoses directly through robot joints.
ID: range:ind-pr-sw-hollow-unit ProductRange verified
IND-PR-SW300 Ultra-Flat Pancake Reducer Minimizes joint axial width to prevent arm interference and keep robot limb profiles human-scale.
ID: range:ind-pr-sw-flat-pancake ProductRange verified
IND-PR-SW400 High-Torque Silk-Hat Gearhead Bridges the gap between lightweight strain-wave reducers and heavy RV reducers for mid-payload robot arm wrists and cobot elbows.
ID: range:ind-pr-sw-silk-hat ProductRange verified
IND-PR-RVC Hollow-Center RV Reducer Primary joint speed reducer for articulated industrial robots (Axes 1 to 3) where high overturning moments and internal cabling meet.
ID: range:ind-pr-rv-hollow-c ProductRange verified
IND-PR-RVE Solid-Output Precision RV Reducer Provides maximum rotational rigidity and shock resistance for machine tool dials, index tables, and robot waist rotation.
ID: range:ind-pr-rv-solid-e ProductRange verified
IND-PR-RVN Compact Slimline RV Reducer Enables fast cycle times on mid-payload robot arm joints by minimizing the mass and inertia of the reducer itself.
ID: range:ind-pr-rv-compact-n ProductRange verified
IND-PR-PL100 Ultra-Precision Helical Planetary High-dynamic positioning on machine tool feed axes, laser cutting gantries, and ballscrew drives.
ID: range:ind-pr-pl-helical-low ProductRange verified
IND-PR-PL200 Flange-Output Planetary Gearbox Direct mechanical bolting of drive pinions and robot arms without intermediate flexible couplings, providing maximum linear drive stiffness.
ID: range:ind-pr-pl-flange-output ProductRange verified
IND-PR-PL300 Right-Angle Bevel Planetary Gearbox Allows motor mounting parallel to machine beds or robot axes where linear space behind the axis is constrained.
ID: range:ind-pr-pl-right-angle ProductRange verified
IND-PR-PL400 High-Speed Economy Planetary Provides reliable speed reduction and torque multiplication for cost-sensitive automation lines where sub-arcminute backlash is not required.
ID: range:ind-pr-pl-economy ProductRange verified
IND-PR-PL500 Stainless IP69K Hygienic Planetary Operates directly in sanitary food contact and pharmaceutical aseptic zones without protective secondary shrouds.
ID: range:ind-pr-pl-hygienic ProductRange verified
IND-PR-CYC100 Pure Cycloidal Drive Provides virtually indestructible torque transmission for heavy material handling, mixers, indexers, and mobile chassis.
ID: range:ind-pr-cyc-standard ProductRange verified
IND-PR-CYC200 Precision Pin-Wheel Cycloid Combines the shock tolerance of cycloidal mechanisms with the precision required for robotic arc welding and palletizing joints.
ID: range:ind-pr-cyc-precision ProductRange verified
IND-PR-HYP100 Precision Hypoid Servo Reducer Transfers motor torque at 90° with high single-stage reduction in compact automated guided vehicles and packaging machines.
ID: range:ind-pr-hyp-servo + 516 more nodes (refine query to filter)