Servo Technology
High-dynamic closed-loop torque, velocity, and position control for modern robotics.
Permanent magnet motors, digital drive amplifiers, and high-resolution feedback.
What Is Servo Technology?
Servo technology refers to active, closed-loop electro-mechanical drive systems. A servo comprises a permanent magnet brushless AC/DC motor, an electronic power amplifier (drive), and a high-resolution position feedback sensor (encoder or resolver) that continuously corrects for load disturbances.
Why It Matters
Unlike open-loop stepper motors that can lose steps under unexpected resistance, a servo system dynamically modulates electrical current to deliver precisely the torque required to maintain commanded trajectory, ensuring micro-radian precision and extreme dynamic responsiveness under varying loads.
How It Works: Kinematics, Dynamics & Regulation Loops
The servo amplifier uses Field-Oriented Control (FOC) to decouple motor stator currents into magnetic flux and torque-producing vectors. Current loops execute at 16 kHz to 32 kHz, velocity loops at 4 kHz to 8 kHz, and position loops at 1 kHz to 4 kHz. The drive continuously monitors rotor angle via absolute optical or magnetic encoders.
Subsystems
Main Components & Physical Hardware
Critical mechanical linkages, motor windings, power stages, and feedback transducers comprising this technology domain.
Brushless Permanent Magnet Synchronous Motor (PMSM)
Neodymium-iron-boron rotor magnets providing high torque-to-inertia ratio and thermal efficiency.
Digital Servo Amplifier
Silicon carbide (SiC) or IGBT power bridge executing pulse-width modulation (PWM) switching.
Optical Absolute Encoder
Multi-turn absolute encoder delivering up to 26-bit resolution (>67 million pulses per revolution) without battery backup.
Dynamic Braking & Regeneration Resistor
Dissipates kinetic energy during rapid axis deceleration or regenerates back to DC bus.
Deployment Areas
Industrial Applications
- Robotic Joint Articulation
- Direct-Drive Rotary Tables
- High-Acceleration Pick & Place Axes
- Autonomous Mobile Vehicle Traction
- Tension Control in Reel Winders
System Integration
Mounts directly onto precision reducers and linear actuators. Interfaces with controllers via digital fieldbuses (EtherCAT, CANopen) or high-speed analog/pulse-direction signals.
Hardware Implementing Servo Technology
Engineering Reference
Frequently Asked Questions: Servo Technology
What is the difference between an incremental and an absolute encoder?
An incremental encoder generates pulses as the motor turns and loses position reference upon power failure, requiring a physical homing routine to find zero. An absolute encoder assigns a unique digital code to every angular position, immediately knowing its exact multi-turn position upon power-up without requiring homing movements.
Why is motor inertia matching critical in servo system sizing?
The ratio of load inertia to motor rotor inertia (inertia ratio) directly dictates control loop stability and tuning bandwidth. While modern drives with load observers can tolerate ratios up to 10:1 or 20:1, keeping the ratio closer to 1:1 or 5:1 yields faster settling times, zero overshoot, and maximum machine throughput.
Connected Ecosystem