Skip to main content
INDUS
Precision Motion & Automation
SERVICE 05•Functional Safety

Safety, Compliance & Risk Engineering

Functional Safety Architecture, Hazard Identification & Risk Engineering

Task-based risk assessments, Performance Level (PLr) determination, safety PLC logic, optical protective zoning, and validation documentation for industrial robot cells.

Service Scope Overview
Ref: INDUS-ES-05
Target Industry & Team:

Safety directors, plant engineering managers, machine OEMs, and system integrators responsible for robotic cell safety compliance.

Engineering Method:4 Structured Phases
Key Deliverables:CAD, Math & Test Records
Deliverable Format:

3D CAD (.STEP / Native), 2D drawings with GD&T, calculation worksheets, and validation test protocols tailored to project scope.

THE ENGINEERING CHALLENGE

What Goes Wrong Without Rigorous Sizing?

Industrial robotic cells present complex hazard profiles including high-inertia arm collisions, unexpected restart, trapping in workpiece clamps, and hazardous energy release. Designing safety systems that merely trip power often leads operators to bypass interlocks to clear jams, creating acute liability and severe accident risks.

Operational Impact:

Inadequate safety engineering leads to regulatory stop-work orders, costly redesigns during final commissioning, and catastrophic workplace injuries.

Critical Failure Modes Addressed

Specific technical risks mitigated through this engineering discipline:

Incorrect Performance Level (PL) calculations underestimating component failure rates

Insufficient safety distance allowing operators to reach hazardous zones before motion stops

Single-fault failure modes that cause interlocks to fail in an undetected dangerous state

Muting configuration flaws on entry conveyors permitting human entry without stopping

ENGINEERING APPROACH

Systematic 4-Phase Engineering Framework

We engineer functional safety from initial hazard identification through to physical validation testing, adhering to ISO 12100 principles and ISO 13849-1 / IEC 62061 quantitative methodologies.

01STAGE 01

Task-Based Hazard Identification

Examine every operating mode: automated production, teach mode, clearing jams, tool change, and preventive maintenance.

Stage Deliverable:Hazard log & initial risk score matrix (Severity, Frequency, Avoidance)
02STAGE 02

Performance Level (PLr) Assignment

Establish required Performance Level (PLr = c, d, or e) and Safety Integrity Level (SIL 1, 2, or 3) for each safety sub-function.

Stage Deliverable:Safety Requirements Specification (SRS)
03STAGE 03

Safety Architecture & Circuit Design

Design dual-channel cross-monitored circuits (Category 3 / 4) with fail-safe safety PLC and safe motion drive functions.

Stage Deliverable:Electrical safety schematics & SISTEMA calculation model
04STAGE 04

Validation & Fault Injection Testing

Execute physical validation protocols: stop-time measurement, optical beam testing, and intentional single-fault insertion.

Stage Deliverable:Formal Safety Validation Report & Declaration Support Package

TECHNICAL CAPABILITIES

Specialized Scope Areas

In-depth technical capabilities applied throughout this service discipline.

Machine & Robot-Cell Hazard Identification

Comprehensive review of all mechanical, electrical, and thermal hazards per ISO 12100.

Engineering Detail:

Analysis covers all operating stages: commissioning, teaching, production, cleaning, and maintenance.

Risk Assessment & PLr / SIL Estimation

Quantitative risk estimation determining necessary safety integrity levels.

Engineering Detail:

Application of ISO 13849-1 risk graphs and IEC 62061 SIL assignment methodologies.

Safety Architecture & Protective Device Integration

Engineering protective physical barriers, optoelectronic curtains, and area scanners.

Engineering Detail:

Calculating minimum safety distances per ISO 13855 based on measured total system stopping times.

Safety PLC & Interlock Integration

Fail-safe logic programming and interlocking guard switch implementation.

Engineering Detail:

Dual-channel pulsed test outputs, cross-fault detection, and safety network protocols (FSoE, PROFIsafe).

Safe Motion Monitoring (STO, SLS, SBC)

Configuring drive-based functional safety for safe operator intervention.

Engineering Detail:

Safe Torque Off (STO), Safely-Limited Speed (SLS), Safe Stop 1 (SS1), and Safe Brake Control (SBC).

Validation Documentation & Evidence

Compiling verifiable safety calculations and physical validation test logs.

Engineering Detail:

SISTEMA software project files documenting MTTFd, DCavg (diagnostic coverage), and CCF (common cause failure).

SYSTEM INTEGRATION

Relevant Hardware & Mechatronic Components

Component technologies sized, verified, or integrated within this service.

Controls

Fail-Safe Safety PLCs

Redundant dual-processor safety logic and network monitoring

Optoelectronics

Safety Light Curtains

Point-of-operation safeguarding with automatic blanking and muting

Optoelectronics

2D Safety Laser Scanners

Configurable warning and protective zone monitoring for mobile and static cells

Mechanical

Interlocked RFID Guard Switches

Tamper-resistant physical guard door status monitoring with guard locking

Drives

Safe Motion Servo Inverters

Hardware-integrated STO / SLS eliminating external contactors

Operator Interface

Illuminated E-Stop Pushbuttons

Emergency power isolation with direct contact block monitoring

PROVEN APPLICATIONS

Representative Engineering Engagements

Examples of verified project challenges and the quantifiable results delivered.

Automotive Electronics

Collaborative Robot Assembly Workstation Safety Validation

Conducted biomechanical transient and quasi-static contact force testing per ISO/TS 15066.

Empirical Result / Metric:

Validated robot speed and separation monitoring, keeping contact pressures well below pain thresholds.

Consumer Goods & Warehousing

High-Speed Palletizer Perimeter Guarding & Muting

Configured 4-beam optical muting array allowing pallet exit while stopping for human entry.

Empirical Result / Metric:

Eliminated nuisance shutdowns while achieving certified Category 4 / PL e protection.

Metal Stamping

Hydraulic Press & Robot Tending Safety Retrofit

Replaced obsolete safety relay circuits with modern fail-safe PLC and dual monitored press safety valves.

Empirical Result / Metric:

Reduced safety stopping time from 420 ms to 190 ms, allowing closer guard positioning.

Intralogistics

Autonomous Mobile Robot (AMR) Fleet Safety Zoning

Dynamic safety field switching based on vehicle speed, steering angle, and payload mass.

Empirical Result / Metric:

Guaranteed complete vehicle stopping prior to obstacle contact across wet epoxy warehouse floors.

PROJECT ARTIFACTS

Potential Deliverables (Qualified by Scope)

Exact deliverables are confirmed during the initial definition phase based on customer data availability, machine interfaces, and project scope.

Risk Assessment & Calculation Packages

  • Comprehensive Machine Risk Assessment Document (ISO 12100 format)
  • Performance Level Verification Report (SISTEMA .SSM file & summary)
  • Safety Distance Calculation Sheets per ISO 13855
  • Safety Requirements Specification (SRS) for control system

Scope qualification: Evidence-backed calculations referencing actual component B10d / MTTFd data.

Validation & Testing Documentation

  • Safety System Validation Plan & Test Record Protocols
  • Single-Fault Injection Verification & Response Log
  • Stopping Time & Stopping Distance Measurement Certificate
  • Operator Safety Operating Procedures & Daily Inspection Checklist

Scope qualification: Never claims certification without supporting empirical test records.

PRE-CONSULTATION CHECKLIST

Information Needed From Your Engineering Team

Preparing these baseline parameters before an engineering consultation accelerates our sizing and simulation work. Missing items can be addressed collaboratively.

Machine Operation & Hazard History

  • Detailed description of machine operational modes (automatic, setup, manual jogging, cleanout)
  • History of near-misses, operator interventions, or safety nuisance trips
  • Target operating speeds, maximum tool masses, and material hazards
  • Existing electrical schematics and safety circuit wiring drawings

Plant Safety Standards & Personnel

  • Internal corporate safety standards or customer EHS guidelines
  • Applicable local regulatory jurisdiction (OSHA, CE Machinery Directive, ANSI/RIA R15.06)
  • Access frequency: how often operators or maintenance staff enter the cell area
  • Availability of machine equipment for physical stopping-time validation testing

FREQUENTLY ASKED QUESTIONS

Technical & Commercial Clarifications

Direct answers regarding scope, timelines, deliverables, and engineering methodologies.

We provide comprehensive functional safety engineering, risk assessments, SISTEMA calculations, and physical validation test evidence. The machine builder or end-user typically applies the final CE mark or self-declaration based on our verified technical construction file.
SERVICE 05 INTAKE

Initiate Safety, Compliance & Risk Engineering

Connect directly with an INDUS application engineer specializing in Safety & Compliance. We review your load parameters, space limits, and cycle-time constraints to produce a tailored scope proposal.

Submit Detailed Spec Sheet