Skip to main content
INDUS
Precision Motion & Automation
ISO 9283 / DIN 3990 / IEC 6003420 Verified Products

Robot Controllers and Motion Control

Deterministic motion controllers, real-time industrial PCs, robot teach pendants, and multi-axis kinematic interpolators.

Motion controllers calculate 6-DOF kinematics, trajectory profiles, electronic gearing, and real-time fieldbus synchronization down to sub-microsecond jitter.

Verified Ranges20 Models
Product Families6 Architectures
Traceability100% Calibrated
Robot Controllers and Motion Control industrial component
Verified Industrial HardwareISO Compliant
Section B: Technology Navigation•Filter by Product Family
6 Configured Mechatronic Subfamilies
Family:
Sort:
Showing 20 of 20 verified products
Adheres strictly to verified datasheets
64-Axis Deterministic EtherCAT Motion Controller industrial component
IND-CTL-64AXIS-ETHERCAT-MOTION
Verified
Robot Controllers and Motion Control

64-Axis Deterministic EtherCAT Motion Controller

Synchronizes up to 64 physical servo axes with complex electronic camming, flying shears, and robot kinematics.

Coordinated AxesUp to 64 physical axes
Cycle Rate1.0 ms (64 axes) / 250 µs (16 axes)
Camming32-bit polynomial spline cam tables
6-Axis Articulated Robot Controller Cabinet with Teach Pendant industrial component
IND-CTL-6AXIS-PENDANT-CABINET
Verified
Robot Controllers and Motion Control

6-Axis Articulated Robot Controller Cabinet with Teach Pendant

Complete plug-and-play controller cabinet including multi-axis inverter drives, safety PLC, and 10-inch color touchscreen pendant.

Pendant10.1" IPS Touchscreen with physical E-Stop & Deadman
Safety RatingISO 13849-1 Cat 4 / PLe
Supply3-Phase 380-480V AC
Open-Architecture ROS 2 / C++ Robotic Controller Board industrial component
IND-CTL-OPEN-ROS2-CONTROLLER
Verified
Robot Controllers and Motion Control

Open-Architecture ROS 2 / C++ Robotic Controller Board

Allows academic robotics researchers and AI startups to run custom joint torque, impedance, and reinforcement learning policies.

API Latency< 100 µs user-space to motor drive
InterfacesDual EtherCAT Master, 4x CAN-FD, 4x GigE Vision
KernelLinux 6.x RT PREEMPT
High-Speed Delta & Parallel Kinematics Motion Controller industrial component
IND-CTL-DELTA-PACKAGING-KINEMATICS
Verified
Robot Controllers and Motion Control

High-Speed Delta & Parallel Kinematics Motion Controller

Dynamic trajectory generation and circular conveyor belt tracking for pick-and-place robots at up to 200 picks/minute.

Pick RateUp to 200 picks/min
Conveyor TrackingUp to 4 simultaneous moving belts
Jerk Control5th-order polynomial S-curves
Multi-Axis CNC G-Code & Electronic Camming Controller industrial component
IND-CTL-CNC-GCODE-CAMMING
Verified
Robot Controllers and Motion Control

Multi-Axis CNC G-Code & Electronic Camming Controller

Combines standard ISO 6983 G-code toolpath execution with high-speed electronic camming and rotary table interpolation.

Look-Ahead1,024 blocks ahead
Path Interpolation3D Spline & NURBS (Nano-smoothing)
AxesUp to 16 coordinated CNC axes
Autonomous Mobile Robot (AMR) Navigation & Fleet Gateway industrial component
IND-CTL-AMR-FLEET-GATEWAY
Verified
Robot Controllers and Motion Control

Autonomous Mobile Robot (AMR) Navigation & Fleet Gateway

Onboard vehicle autonomy computer combining 3D SLAM, obstacle dynamic avoidance, and warehouse traffic orchestration.

Fleet StandardVDA 5050 v2.0 Compliant
NavigationLiDAR / Vision Natural Feature SLAM
Vehicle SafetyISO 3691-4 Safety Architecture
Micro-Footprint DIN-Rail Embedded Motion Controller industrial component
IND-CTL-DIN-RAIL-EMBEDDED-MOTION
Verified
Robot Controllers and Motion Control

Micro-Footprint DIN-Rail Embedded Motion Controller

Compact, low-cost motion control for automated laboratory instruments, medical pipetters, and semiconductor benchtop tools.

Axes4 - 8 Stepper/Servo Axes
Enclosure35 mm DIN-rail mount
Power24V DC / 10W
Multi-Robot Synchronized Workcell Workgroup Controller industrial component
IND-CTL-MULTI-ROBOT-SYNCHRONIZED
Verified
Robot Controllers and Motion Control

Multi-Robot Synchronized Workcell Workgroup Controller

Coordinates up to 4 robots sharing a single geometric workspace without collisions and with synchronized part handover.

Synchronized Rob…Up to 4 arms (24 axes total)
Relative Tool Ac…±0.05 mm during coordinated moves
BusShared memory EtherCAT
Hardware FPGA High-Speed Trajectory Generator Coprocessor industrial component
IND-CTL-FPGA-TRAJECTORY-COPROCESSOR
Verified
Robot Controllers and Motion Control

Hardware FPGA High-Speed Trajectory Generator Coprocessor

Executes 100 kHz position loop setpoint interpolation and laser pulse firing with sub-nanosecond pulse jitter.

Hardware Loop Rate100,000 Hz (10 µs cycle)
Trigger Jitter< 5 ns
Output ModePosition-Synchronized Output (PSO)
Integrated Soft PLC & Motion Runtime (IEC 61131-3) industrial component
IND-CTL-SOFT-PLC-IEC61131
Verified
Robot Controllers and Motion Control

Integrated Soft PLC & Motion Runtime (IEC 61131-3)

Combines ladder logic, structured text, and multi-axis motion in a single unified deterministic runtime environment.

StandardsIEC 61131-3 & PLCopen Motion
LanguagesStructured Text, Ladder, Function Block
Cycle Time1.0 ms deterministic
Heavy-Duty Foundry & Washdown Controller Cabinet (IP54 / IP65) industrial component
IND-CTL-FOUNDRY-GRADE-CABINET
Verified
Robot Controllers and Motion Control

Heavy-Duty Foundry & Washdown Controller Cabinet (IP54 / IP65)

Protects sensitive drive electronics and controllers against extreme ambient heat (50°C), conductive graphite dust, and water jets.

ProtectionIP54 / IP65 sealed
CoolingClosed-Loop A/C (operates up to 55°C ambient)
MaterialAISI 304 / 316L Stainless Steel
Vision-Guided Robotics (VGR) Integrated Motion Engine industrial component
IND-CTL-VGR-INTEGRATED-ENGINE
Verified
Robot Controllers and Motion Control

Vision-Guided Robotics (VGR) Integrated Motion Engine

Performs continuous dynamic visual servoing, updating robot trajectory in real time based on moving camera feedback.

Latency< 12 ms visual feedback loop
CalibrationAutomated 6-DOF Hand-Eye Calibration
Supported Kinema…6-Axis, SCARA, Delta, Cartesian
Low-Latency Bilateral Haptic Teleoperation Controller industrial component
IND-CTL-HAPTIC-TELEOPERATION-BILATERAL
Verified
Robot Controllers and Motion Control

Low-Latency Bilateral Haptic Teleoperation Controller

Reflects tool contact forces back to a remote surgeon or operator with sub-10 ms latency and transparent haptic fidelity.

Force Reflection…< 8 ms local / < 25 ms over 5G private slice
Bandwidth1,000 Hz force feedback loop
Tremor FilterActive 10 Hz notch filter
Sub-Nanometer Closed-Loop Piezo Motion Controller industrial component
IND-CTL-PIEZO-NANOPOSITIONING-CONTROLLER
Verified
Robot Controllers and Motion Control

Sub-Nanometer Closed-Loop Piezo Motion Controller

Drives piezoelectric stages with sub-nanometer position stability and active feedforward compensation for mechanical resonances.

Noise Floor< 0.08 nm RMS
BandwidthUp to 5 kHz
Voltage Range-30V to +150V bipolar
Digital Twin & Virtual Commissioning Hardware-in-the-Loop Gateway industrial component
IND-CTL-DIGITAL-TWIN-GATEWAY
Verified
Robot Controllers and Motion Control

Digital Twin & Virtual Commissioning Hardware-in-the-Loop Gateway

Connects real robot controller hardware directly to physics simulation engines (NVIDIA Omniverse, Siemens Process Simulate) before physical building.

Emulated ProtocolEtherCAT / PROFINET IRT Slave
Simulation Sync1 ms hardware-in-the-loop (HIL)
Collision ModelReal-time 3D bounding geometry
Fault-Tolerant Redundant Dual-Master Motion Controller industrial component
IND-CTL-REDUNDANT-DUAL-MASTER
Verified
Robot Controllers and Motion Control

Fault-Tolerant Redundant Dual-Master Motion Controller

Zero-downtime hot-standby motion control for critical continuous chemical reactors, glass float lines, and semiconductor fab utilities.

Failover Latency< 500 µs bumpless transfer
Redundancy1:1 Hot-Standby Mirror
ReliabilityMTBF > 350,000 hours
Heterogeneous Edge AI & Real-Time Motion Compute Box industrial component
IND-CTL-EDGE-AI-COMPUTE-BOX
Verified
Robot Controllers and Motion Control

Heterogeneous Edge AI & Real-Time Motion Compute Box

Combines 275 TOPS of AI deep learning inference with microsecond-level deterministic robot joint trajectory control in one box.

AI Performance275 TOPS Tensor Core GPU
Real-Time CoreARM Cortex-R5 dedicated to fieldbus
Supply19 - 54V DC (Battery compatible)
Integrated 4-Axis SCARA Motion Control Card industrial component
IND-CTL-SCARA-PICK-PLACE-CORE
Verified
Robot Controllers and Motion Control

Integrated 4-Axis SCARA Motion Control Card

Dedicated low-cost, high-speed 4-axis motion controller optimized specifically for SCARA pick-and-place arms.

Standard Cycle T…0.38 s (25 mm up, 300 mm over, 25 mm down)
Repeatability±0.01 mm
Direct Drive Cha…4 Axes integrated
High-Pressure Hydraulic Servo Axis Motion Controller industrial component
IND-CTL-HYDRAULIC-SERVO-MOTION
Verified
Robot Controllers and Motion Control

High-Pressure Hydraulic Servo Axis Motion Controller

Precision position and pressure/force control for heavy hydraulic cylinders on forging presses and die-casting machines.

Hydraulic Loop R…10 kHz
Pressure Resolut…0.01 bar
Valve Output±10V / ±40mA proportional valve drive
Section E: Engineering Specification

Technical Selection Guidance for Robot Controllers and Motion Control

Specifying the appropriate robotic drivetrain and automation hardware requires a holistic evaluation of mechanical stiffness, duty cycle thermals, reflected inertia, and fieldbus communication latency.

Primary Engineering Selection Factors

Kinematic & Dynamic Verification
  • Operating continuous and peak torque / thrust ratings
  • Compatibility with primary industrial fieldbuses and controllers
  • Environmental ingress protection and thermal duty cycle constraints

System Integration Considerations

Control Bus & Power Architecture
  • Dynamic duty cycle and thermal equilibrium
  • Mechanical alignment and shaft coupling stiffness
  • Safety compliance and diagnostic coverage
Section F1: Field Deployment

Primary Industrial Applications

Validated manufacturing tasks where Robot Controllers and Motion Control delivers proven precision and uptime.

Automotive Powertrain & EV Battery Assembly

Production Verified

Semiconductor Wafer Transfer & Cleanroom Metrology

Production Verified

CNC High-Speed Milling & Robotic Machine Tending

Production Verified

Automated Packaging, Sortation & Case Palletizing

Production Verified

Aerospace Composite Drilling & Rivet Inspection

Production Verified

Medical Device Precision Micromanipulation

Production Verified
Section F2: Coordinated Systems

Related Technologies

Interoperable motion components and engineering sizing utilities.

Application Engineering Support

Need Assistance Sizing Robot Controllers and Motion Control?

Our application engineers can verify inertia ratios, motor torque curves, duty cycle thermals, and fieldbus synchronization parameters for your machinery before purchase.