Component Comparison Tool
Compare up to 4 components side-by-side across verified mechanical kinematics, torque/force ratings, fieldbus compatibility, ISO tolerances, and operating boundaries. Select pre-engineered benchmark sets or build custom comparisons.
Side-by-Side Technical Comparison Matrix
Component Specification Comparator
Compare 2 to 4 components across verified ratings, mechanical constraints, interfaces, and limitations.
Technical Comparison Presets
| Engineering Dimension | precision-reducers IND-RED-HMC-025-CS Zero-Backlash Strain Wave Gear Reducer | precision-reducers IND-RED-CYC-160-RV High-Shock Cycloidal Pin-Wheel Speed Reducer | precision-reducers IND-RED-PLN-090-P1 Precision Inline Planetary Gearbox |
|---|---|---|---|
| Verification Status | Verified Specification Ref: DS-RED-HMC-2026-REV5 (Rev 5.2) | Verified Specification Ref: DS-RED-CYC-2026-REV2 (Rev 2.0) | Verified Specification Ref: DS-RED-PLN-2026-REV3 (Rev 3.1) |
| Traceable Test Source | INDUS Precision Metrology Hysteresis Rig #1 | INDUS Heavy Drive Test Bay #3 (High-Shock Dynamometer) | INDUS Gear Metrology Zeiss Klingelnberg Test #5 |
| Key Performance Parameters | Single-Stage Reduction Ratios:50:1 / 80:1 / 100:1 / 120:1 / 160:1 ratio Single-stage strain wave mechanism Rated Output Torque (50:1):78.0 Nm At 2000 rpm input, L10 life 15,000h Rated Output Torque (100:1):105.0 Nm At 2000 rpm input, L10 life 15,000h Permissible Peak Torque (T_peak):245.0 Nm Acceleration / deceleration peak | Available Reduction Ratios:41:1 / 81:1 / 121:1 / 161:1 ratio 2-stage cycloidal disc configuration Rated Output Torque (T2N):1250 Nm At 15 rpm output, 6000h continuous S1 life Acceleration / Deceleration Torque (T2B):2800 Nm Duty cycle ≤ 20%, max duration 2.0s Shock / Emergency Stop Torque:6250 Nm 500% rated torque shock absorption | Available Reduction Ratios:3:1 to 100:1 ratio 1-stage (3-10:1), 2-stage (15-100:1) Rated Output Torque (T2N):185.0 Nm At 10:1 ratio, 3000 rpm input, L10h = 20,000h Peak Acceleration Torque (T2B):320.0 Nm 1000 cycles/hour max Emergency Stop Torque (T2NOT):550.0 Nm Max 1000 events across gear life |
| Mechanical Mounting | Standard Robot Wrist Output Flange (ISO 9409-1-50-4-M6) 8x M5 mounting holes on Circular Spline Ø95mm pitch Max Overhung Load: 1850 N radial, 2400 N axial dynamic capacity | Robot Base Flange / Hollow Output Pilot Ø190h7 12x M10 high-tensile bolt pattern on Ø220mm circle Max Overhung Load: 14,500 N radial, 18,000 N axial dynamic capacity | Square Output Flange 90x90mm / Round Pilot Ø80h7 4x Ø9mm through-holes on Ø100mm bolt circle Max Overhung Load: 4800 N radial load at 25mm from flange face |
| Electrical & Drive Requirements | Supply: Passive mechanical reducer driven by frameless or framed servo motor Rated/Peak: N/A / N/A Feedback: Dual-encoder setup recommended (motor rotor + reducer output) | Supply: Passive speed reducer driven by 1.5kW to 7.5kW servo motor Rated/Peak: N/A / N/A Feedback: Resolver or multi-turn absolute encoder on motor shaft | Supply: Passive mechanical gearbox; driven by external servo motor Rated/Peak: N/A (Mechanical) / N/A (Mechanical) Feedback: Motor encoder on drive shaft; optional output resolver |
| Control & Fieldbuses | N/A - Mechanical Reducer Loop Cycle: N/A | N/A - Mechanical Reducer Loop Cycle: N/A | N/A - Mechanical Component Loop Cycle: N/A |
| Environmental Constraints | Rating: IP54 component set; IP65 when integrated in sealed robot casting Operating: -10°C to +80°C housing temperature Storage: -25°C to +85°C | Rating: IP65 with oil-resistant shaft and flange seals Operating: -10°C to +85°C Storage: -30°C to +90°C | Rating: IP65 with double lip output shaft oil seals Operating: -20°C to +90°C housing temperature Storage: -30°C to +95°C |
| Ideal Applications |
|
|
|
| Operating Limitations & Boundaries |
|
|
|
| Actions & RFQ | View Product Page | View Product Page | View Product Page |
Need Dynamic Physics Sizing for Your Architecture?
Run ball screw lead formulas, calculate reflected inertia ratios (JL/JM ≤ 5:1), and generate a certified engineering passport in INDUS Motion Studio.