
Linear Actuators
Precision guided linear motion module for controlled travel and repeatable positioning.

Precision inline and right-angle planetary gearboxes for industrial automation machinery.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Planetary Reducers, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-RED-PLN-090 series provides torque multiplication and speed reduction with low backlash (< 1 arcmin in P1 precision class). Built with helical carburized alloy steel gears (DIN 3962 Quality 5) and supported by heavy-duty taper roller bearings, it handles high radial and axial loads on dynamic servomotor axes.
The IND-RED-PLN-090 series provides torque multiplication and speed reduction with low backlash (< 1 arcmin in P1 precision class). Built with helical carburized alloy steel gears (DIN 3962 Quality 5) and supported by heavy-duty taper roller bearings, it handles high radial and axial loads on dynamic servomotor axes.
Addresses kinematic precision challenges by: Continuous operating torque T2N vs application duty cycle.
Serves as the high-precision torque-multiplication and motion-conversion core at robot joints, turntable positioners, and precision linear slides.
Kinematic speed reduction and torque multiplication via elastic flexspline deformation or multi-pin cycloidal eccentricity. Assigned to Robot Joint Articulation (J1 through J6) & Rotary Positioning Stages.
Motor input shaft delivers high rotational velocity (2,000 - 6,000 RPM) with low mechanical torque to the reducer input hub.
Input assembly continuously deflects flexible or cycloidal gear elements, causing simultaneous conjugate meshing across 30%+ of teeth without backlash.
Output cross-roller bearing delivers high continuous torque (Tau_out = Tau_in * ratio * efficiency) with sub-arcminute lost motion.
Zero mechanical backlash but requires significantly larger motor volume, higher continuous power, and active cooling to achieve equivalent joint torque.
Higher mechanical efficiency and shock capacity, but exhibits 1-3 arcmin backlash compared to true zero-backlash strain-wave units.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Gear Metrology Zeiss Klingelnberg Test #5.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Available Reduction Ratios Verified | 3:1 to 100:1 | ratio | 1-stage (3-10:1), 2-stage (15-100:1) |
Rated Output Torque (T2N) Verified | 185.0 | Nm | At 10:1 ratio, 3000 rpm input, L10h = 20,000h |
Peak Acceleration Torque (T2B) Verified | 320.0 | Nm | 1000 cycles/hour max |
Emergency Stop Torque (T2NOT) Verified | 550.0 | Nm | Max 1000 events across gear life |
Torsional Backlash (Precision Class P1) Verified | < 1.0 | arcmin | At 2% rated torque |
Standard Backlash (Class P2) Verified | < 3.0 | arcmin | Standard catalog variant |
Mechanical Efficiency Verified | ≥ 97% | % | ≥ 94% on 2-stage at nominal speed |
Nominal Input Speed Verified | 3500 | rpm | Max input speed 6000 rpm |
Max Permissible Radial Force (Fr) Verified | 4800 | N | Output shaft taper roller bearings |
Max Permissible Axial Force (Fa) Verified | 3900 | N | Output shaft taper roller bearings |
Torsional Rigidity Verified | 18.5 | Nm/arcmin | Measured at output shaft |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Planetary Reducers.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Square Output Flange 90x90mm / Round Pilot Ø80h7
Universal mounting orientation (horizontal, vertical shaft up/down)
Passive mechanical gearbox; driven by external servo motor
External servo drive matched to driving motor
Sync Cycle: N/A
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-PLANETARY_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Planetary Reducers.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration