
Harmonic Reducers
Ultra-compact strain wave gearing delivering zero backlash and high single-stage gear ratios.

High-stiffness pin-wheel cycloidal drive capable of enduring 500% momentary shock loads.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Cycloidal Reducers, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-RED-CYC-160 is a heavy-duty cycloidal pin-wheel speed reducer designed for the base, shoulder, and elbow axes of high-payload industrial robots. Unlike standard involute gears, cycloidal drive discs share contact across 30% of their profile simultaneously, allowing the unit to absorb extreme shock loads (up to 500% of rated torque) without tooth breakage.
The IND-RED-CYC-160 is a heavy-duty cycloidal pin-wheel speed reducer designed for the base, shoulder, and elbow axes of high-payload industrial robots. Unlike standard involute gears, cycloidal drive discs share contact across 30% of their profile simultaneously, allowing the unit to absorb extreme shock loads (up to 500% of rated torque) without tooth breakage.
Addresses kinematic precision challenges by: Dynamic tilting moment (Mc) generated during rapid arm acceleration with full payload.
Serves as the high-precision torque-multiplication and motion-conversion core at robot joints, turntable positioners, and precision linear slides.
Kinematic speed reduction and torque multiplication via elastic flexspline deformation or multi-pin cycloidal eccentricity. Assigned to Robot Joint Articulation (J1 through J6) & Rotary Positioning Stages.
Motor input shaft delivers high rotational velocity (2,000 - 6,000 RPM) with low mechanical torque to the reducer input hub.
Input assembly continuously deflects flexible or cycloidal gear elements, causing simultaneous conjugate meshing across 30%+ of teeth without backlash.
Output cross-roller bearing delivers high continuous torque (Tau_out = Tau_in * ratio * efficiency) with sub-arcminute lost motion.
Zero mechanical backlash but requires significantly larger motor volume, higher continuous power, and active cooling to achieve equivalent joint torque.
Higher mechanical efficiency and shock capacity, but exhibits 1-3 arcmin backlash compared to true zero-backlash strain-wave units.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Heavy Drive Test Bay #3 (High-Shock Dynamometer).
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Available Reduction Ratios Verified | 41:1 / 81:1 / 121:1 / 161:1 | ratio | 2-stage cycloidal disc configuration |
Rated Output Torque (T2N) Verified | 1250 | Nm | At 15 rpm output, 6000h continuous S1 life |
Acceleration / Deceleration Torque (T2B) Verified | 2800 | Nm | Duty cycle ≤ 20%, max duration 2.0s |
Shock / Emergency Stop Torque Verified | 6250 | Nm | 500% rated torque shock absorption |
Torsional Backlash Verified | < 1.0 | arcmin | At ±3% rated torque reversal |
Torsional Rigidity Verified | 115.0 | Nm/arcmin | Ultra-high rigidity for heavy robot arms |
Maximum Input Speed Verified | 3000 | rpm | Nominal input speed 1500 rpm |
Permissible Bending Moment (Mc) Verified | 5400 | Nm | Large internal main angular roller bearings |
Center Through-Hole Option Verified | 55 | mm | Hollow-bore version for cable looms |
Mechanical Efficiency Verified | 85% - 90% | % | At rated torque and input speed |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Cycloidal Reducers.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Robot Base Flange / Hollow Output Pilot Ø190h7
Universal mounting; ensure grease drain/fill plugs remain accessible
Passive speed reducer driven by 1.5kW to 7.5kW servo motor
Drive amplifier with active vibration damping algorithms
Sync Cycle: N/A
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-CYCLOIDAL_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Cycloidal Reducers.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration