Skip to main content
INDUS
Precision Motion & Automation
Technology Stack/Engineering Architecture

Sensors & Feedback

High-precision physical state feedback closing the loop on robotic positioning and cell safety.

Optical encoders, torque transducers, 3D laser profilers, and safety presence scanners.

Core Definition

What Is Sensors & Feedback?

Sensors and feedback devices measure physical parameters (position, velocity, force, torque, distance, temperature, presence) and convert them into high-speed digital or analog signals used by controllers to regulate movement and ensure operating safety.

Engineering Rationale

Why It Matters

Robotics cannot function open-loop. High-precision feedback determines how accurately a robot reaches a commanded point, how gently it inserts a delicate connector, and whether it safely decelerates when a human worker approaches the work zone.

Operating Principles

How It Works: Kinematics, Dynamics & Regulation Loops

Optical encoders use calibrated reticles and photodetector arrays to measure shaft angle with sub-arcsecond resolution. Strain-gauge torque sensors measure micro-deflections in flexure beams to report joint loads. 3D laser triangulation cameras project laser lines onto targets to reconstruct 3D coordinate point clouds.

Subsystems

Main Components & Physical Hardware

Critical mechanical linkages, motor windings, power stages, and feedback transducers comprising this technology domain.

Absolute Joint Rotary Encoders

Single-turn and multi-turn optical/magnetic encoders reporting exact angular joint state.

6-Axis Force-Torque Sensors

Multi-axis strain transducers mounted between robot wrist and end-effector for force-controlled assembly.

Safety Laser Scanners

Time-of-flight LiDAR sensors defining programmable protective warning and stop safety zones.

3D Machine Vision Cameras

Structured light and laser profile sensors providing spatial coordinates for unstructured bin picking.

Deployment Areas

Industrial Applications

  • Collaborative Force-Limited Assembly
  • Robotic Seam Tracking in Welding
  • Safety Area Guarding Around Mobile Robots
  • In-Line Dimensional Metrology
  • Bin Picking of Unsorted Metal Castings
Interoperability

System Integration

Connects directly to servo drive encoder feedback ports (BiSS-C, EnDat, SSI) or to controllers via EtherCAT, IO-Link, and Gigabit Ethernet.

Engineering Reference

Frequently Asked Questions: Sensors & Feedback

What is the difference between primary motor encoder and secondary joint encoder?

A primary encoder is mounted directly to the motor shaft before the gearbox, providing fast velocity feedback for motor commutation. A secondary encoder is mounted on the output shaft of the gearbox after the reduction, directly measuring the true joint angle. Dual-encoder feedback eliminates errors caused by gearbox backlash and torsional compliance under heavy loads.

What is IO-Link and why is it useful for industrial sensors?

IO-Link is a standardized point-to-point digital communication protocol for sensors and actuators. Unlike simple on/off digital sensors, IO-Link transmits process values, diagnostic parameters, and configuration data over standard unshielded 3-wire cables, allowing remote sensor parameterization and predictive maintenance.