Skip to main content
INDUS
Precision Motion & Automation
Servo Actuators (IND-SERVO) technical hardware illustration
Model Identifier:IND-SERVO
Engineering Standard:INDUS Embedded Systems Hardware Lab Qual #11
Verification Level: Audited Specification
Traceable Lab Bench TestingView Full Matrix ↓
Actuators/Actuators

Servo Actuators

High-dynamic integrated servo module with built-in drive electronics and safety functions.

Continuous Output Torque48.0Nm · At nominal 48VDC bus, 25°C ambient
Peak Output Torque142.0Nm · Peak duration ≤ 1.5s
Rated Output Speed45rpm · After 100:1 strain wave gear stage
Maximum Output Speed70rpm · At 54 VDC max bus voltage
Inventory & Batch AllocationConfigurable Order Quantity (Min 1 · Max 10 Units)
Lead Time: 1-2 Weeks
20 available in stockOrder limits: Min 1 · Max 10 units

Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.

3. Product Overview & Operating Principle

Engineering Fundamentals & Automation Architecture

Detailed mechatronic breakdown of Servo Actuators, highlighting functional architecture, physical operating mechanisms, and deployment role.

1. What the Product Is

The IND-ACT-SRV-090 is a self-contained smart joint combining a high-density frameless servomotor, sub-arcminute strain wave gearing, dual high-resolution encoders, and an integrated 48V GaN servo drive with hardware STO (SIL 3 / PLe). It eliminates external drive cabinets and motor cables, enabling ultra-compact robotic arms and articulated mechanisms.

2. Operating Physical Principle

The IND-ACT-SRV-090 is a self-contained smart joint combining a high-density frameless servomotor, sub-arcminute strain wave gearing, dual high-resolution encoders, and an integrated 48V GaN servo drive with hardware STO (SIL 3 / PLe). It eliminates external drive cabinets and motor cables, enabling ultra-compact robotic arms and articulated mechanisms.

3. Engineering Problem Addressed

Addresses kinematic precision challenges by: Continuous root-mean-square (RMS) joint torque profile across robotic trajectory.

4. Role in Automation Systems

Serves as the high-precision torque-multiplication and motion-conversion core at robot joints, turntable positioners, and precision linear slides.

Target Operating Environment: Industrial factory floor environments with operating temperatures from -10°C to +45°C.
4. Verified Technical Specifications

Engineering Specification Matrix

Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Embedded Systems Hardware Lab Qual #11.

ParameterSpecification ValueUnitNotes & Test Conditions
Continuous Output Torque
Verified
48.0NmAt nominal 48VDC bus, 25°C ambient
Peak Output Torque
Verified
142.0NmPeak duration ≤ 1.5s
Rated Output Speed
Verified
45rpmAfter 100:1 strain wave gear stage
Maximum Output Speed
Verified
70rpmAt 54 VDC max bus voltage
Torsional Backlash
Verified
< 1.0arcminZero-backlash strain wave reducer
Dual-Encoder Repeatability
Verified
±0.003degMeasured at output flange directly
Permissible Tilting Moment
Verified
320NmIntegrated cross-roller bearing
Drive Efficiency
Verified
88%%At rated torque & speed (motor + drive + gear)
Functional Safety Rating
Verified
SIL 3 / PLeISO 13849-1Dual-channel Safe Torque Off (STO)
All specifications are audited in accordance with INDUS Embedded Systems Hardware Lab Qual #11. Continuous capacity (S1) is strictly distinguished from peak limits.
Model Family: IND-SERVO
6. Target Industrial Applications

Verified Deployment Scenarios & Operating Environments

Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Servo Actuators.

Explore All Industry Solutions
Scenario 01 Verified Deployment

Servo Actuators Automated Manufacturing Cell

Environment: Industrial assembly, inspection, and robotic workcells

Operational Challenge:

Eliminating cycle time bottlenecks and cumulative tolerance stack-up.

How Servo Actuators Solves It:

Integrates directly via standardized mechanical flanges and communication interfaces.

Required Supporting Subsystems:
  • Host Automation Controller
  • Dedicated Safety Circuit
  • Regulated Power Supply
Considerations: Verify dynamic moment loads and structural alignment prior to commissioning.
Confirm application load factors with INDUS engineering sizing tools.
7. Engineering Benefits & Causality

Technical Feature → Engineering Effect → Customer Advantage

Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.

1. Technical Feature

Calibrated ISO Manufacturing Conformance

2. Engineering Effect

Eliminates dimensional variance and structural backlash across all production lots.

3. Customer Benefit

Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.

Verification & Operating Boundaries:Valid under specified load envelopes per INDUS Embedded Systems Hardware Lab Qual #11.
1. Technical Feature

High-Rigidity Engineering Materials & Bearings

2. Engineering Effect

Resists torsional and bending deflection under dynamic acceleration cycles.

3. Customer Benefit

Prevents machine vibration chatter and protects sensitive end-of-arm tooling.

Verification & Operating Boundaries:Maintain recommended lubrication schedules and torque tightening specifications.
1. Technical Feature

Standardized Fieldbus & Mechanical Interfaces

2. Engineering Effect

Enables plug-and-play communication and rapid electrical integration.

3. Customer Benefit

Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.

Verification & Operating Boundaries:Compatible with standard industrial PLC controllers and shielded cabling.
8. Integration & Compatibility

Mechanical, Electrical & Control Interfaces

Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.

Mechanical Interface

Mechanical Mounting & Interfaces

Direct bolt circle ISO 9409-1-50-4-M6

Universal mounting; daisy-chainable in series joint-to-joint

Electrical & Power

Electrical & Power Specifications

24 VDC to 54 VDC (Nominal 48 VDC)

Built-in drive; requires external 48VDC power bus only

Fieldbus Synchronization

Control & Fieldbus Synchronization

Sync Cycle: 250 µs to 1 ms

Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.

Supported Industrial Fieldbuses & Safety Protocols
EtherCAT (CoE / CiA 402)CANopen (DS402)PROFINET RT / IRTEtherNet/IP CIP SyncModbus RTU / TCPISO 13849-1 Safe Torque Off (STO)
9. Technical Documentation & CAD Models

Datasheets, 3D STEP Geometry & User Manuals

All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.

INTERACTIVE 3D CAD KINEMATICSIND-SERVO // STEP AP242 / GLTF
IND-SERVO
Full 3D Kinematic Envelope
DATUM ORIGIN (0,0,0)
Click & drag to rotate 3D assembly · Scroll to zoom
Calibrated Geometric Model:IND-SERVO_ASSEMBLY.STEP
Conforms to ISO 10303-242 / DIN 3990. Includes full mating constraints and collision envelopes.
DatasheetPDF · 4.8 MB

Servo Actuators Engineering Datasheet & Sizing Curves

DS-ACT-SRV-2026-REV4

Audited Lab Specification

CAD 3D STEPSTEP / AP214 · 32.6 MB

Servo Actuators 3D STEP Assembly Geometry Model

CAD-IND-SERVO-STEP

Accurate C.G. Matrix

ManualPDF · 6.4 MB

Servo Actuators Integration & Commissioning Manual

MAN-IND-SERVO-2026

Official Documentation

11. Frequently Asked Questions

Technical FAQs & Integration Guidelines

Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Servo Actuators.

Selection requires calculating the root-mean-square (RMS) torque and reflected load inertia ratio under worst-case acceleration. Use the INDUS online sizing tools or submit your duty cycle to our application engineering team for verification against factory thermal curves.
12. Engineering Consultation & RFQ

Need Help Selecting the Right Product?

Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.

Selected Product:Servo Actuators
Product Identifier:servo
Engineering Family:Actuators
Standard Conformance:INDUS Embedded Systems Hardware Lab Qual #11
Need immediate sizing advice?

• Official NDA protected technical evaluation

• 24 business hours standard proposal response

• Factory direct engineering support & CAD integration

Request Official Quotation & Application Verification

Prefilled with Servo Actuators specifications. Fill in your details below.