
Servo Actuators
High-dynamic integrated servo module with built-in drive electronics and safety functions.

Safe, lightweight collaborative robot with intuitive hand-guided teaching and joint torque sensing.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Collaborative Robots, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-ARM-COB-1000 is a certified collaborative 6-axis robot arm designed for direct human-robot collaboration without physical perimeter safety fencing. Featuring dual high-resolution torque sensors integrated into all 6 joints, rounded aluminum link contours, and configurable safety zones complying with ISO/TS 15066 (Power and Force Limiting), it provides intuitive hand-guide teaching and seamless line deployment.
The IND-ARM-COB-1000 is a certified collaborative 6-axis robot arm designed for direct human-robot collaboration without physical perimeter safety fencing. Featuring dual high-resolution torque sensors integrated into all 6 joints, rounded aluminum link contours, and configurable safety zones complying with ISO/TS 15066 (Power and Force Limiting), it provides intuitive hand-guide teaching and seamless line deployment.
Addresses kinematic precision challenges by: Risk Assessment: human-robot contact zones must be evaluated under ISO/TS 15066 pressure/force limits.
Executes high-speed multi-axis kinematic manipulation, assembly, welding, or material handling tasks within structured automated cells.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to TÜV Rheinland Functional Safety ISO 10218 / ISO/TS 15066 Audit.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Rated Wrist Payload Verified | 10.0 | kg | Full reach envelope without derating |
Maximum Working Radius Verified | 1300 | mm | Spherical working envelope |
Pose Repeatability Verified | ±0.030 | mm | Under full 10kg payload |
Collaborative Contact Force Threshold Verified | < 65 | N | ISO/TS 15066 compliant collision stop in < 50ms |
Collaborative TCP Speed Limit Verified | 250 - 1000 | mm/s | 250 mm/s collaborative mode; 1000 mm/s high-speed mode |
Joint Torque Sensor Accuracy Verified | ±0.5% | % FS | Dual strain-gauge torque sensors on all 6 axes |
Total Manipulator Mass Verified | 33.5 | kg | Ultra-lightweight aerospace alloy links |
Power Consumption Verified | 350 | W | Typical production cycle with 5kg payload |
Safety Integrity Level Verified | Cat 3 PL d / SIL 2 | ISO 13849-1 | 16 configurable safety functions (STO, SLS, SLP, SS1) |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Collaborative Robots.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Compact Base Flange (Ø160mm)
Mountable at any angle: floor, ceiling, wall, or mobile AMR chassis
Single-Phase 100-240 VAC, 50/60 Hz or 48 VDC (Battery Powered Mobile Variant)
Built-in decentralized joint drives; external control cabinet requires 24V/48V power only
Sync Cycle: 1 ms trajectory loop rate
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-COLLABORATIVE_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Collaborative Robots.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration