
Linear Actuators
Precision guided linear motion module for controlled travel and repeatable positioning.
Servo-electric 2-finger parallel gripper with digital force & position regulation.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of EPG-20 Precision Electric Parallel Gripper, highlighting functional architecture, physical operating mechanisms, and deployment role.
Servo-electric 2-finger parallel robot gripper providing programmable gripping force, part drop detection, and 20 mm stroke per finger without compressed air.
Miniature brushless servomotor with right-and-left threaded leadscrew synchronizes both jaws, measuring motor current for closed-loop gripping force regulation.
Solves multi-axis alignment errors, mechanical backlash drift, and dynamic vibration during high-speed production cycles.
Provides the physical contact, clamping, and process tooling interface between the robotic manipulator and the manufactured workpiece.
Calibrated workpiece clamping force, compliant passive/active centering, and pneumatic vacuum suction generation. Assigned to Robot Wrist Tooling & Workpiece Manipulation Interface.
Robot controller transmits target gripping width and calibrated force limit over IO-Link, fieldbus, or discrete 24V I/O.
Synchronized dual-finger wedge mechanisms or multi-stage Venturi vacuum ejectors translate actuator input into workpiece contact.
Current feedback, optical distance sensing, or vacuum pressure threshold sensors confirm secure part acquisition before robot arm motion begins.
Higher force-to-weight ratio and low initial cost, but lacks intermediate finger positioning, force programmability, and energy efficiency.
Instantaneous grip for sheet metal without custom jaws, but only works on ferromagnetic metals and can attract grinding chips/debris.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to ISO 9283 / IEC 60034 Industrial Automation Standard.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Gripping Force Verified | 20 N to 140 N (Adjustable in 1% Steps) | N | Confirmed upon order specification review. |
Total Stroke Verified | 40 mm (20 mm per Finger) | mm | Confirmed upon order specification review. |
Position Repeatability Verified | ±0.02 mm | mm | Confirmed upon order specification review. |
Closing Time Verified | 0.25 s | — | Confirmed upon order specification review. |
Recommended Workpiece Weight Verified | Up to 2.5 kg | mm | Confirmed upon order specification review. |
Interface Flange Verified | ISO 9409-1 Standard (Mounts directly to robot wrist) | — | Confirmed upon order specification review. |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for EPG-20 Precision Electric Parallel Gripper.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
ISO Standard Flange / Precision Dowel Alignment
Universal mounting in horizontal, vertical, or inverted orientations with precision dowel hole alignment.
48V DC Regulated Bus (24V–56V range)
Integrated field-oriented control or compatible with standard industrial AC/DC servo inverters.
Cycle Time ≤ 1.0 ms (Jitter < 1 µs)
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-EE-EPG20_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for EPG-20 Precision Electric Parallel Gripper.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration