
4-Axis Robots
Fast SCARA and Cartesian robotic arms optimized for planar assembly and packaging cycles.

Ceiling-mounted delta robot achieving up to 180 picks per minute on moving conveyor lines.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Pick & Place Robots, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-ARM-DLT-1200 is a parallel kinematic Delta robot engineered for ultra-high-speed pick-and-place, carton loading, blister packaging, and secondary sorting. With three high-torque direct-driven base motors and carbon-fiber composite parallel arms moving a lightweight titanium tool platform, it executes up to 180 picks per minute with sub-millimeter repeatable accuracy.
The IND-ARM-DLT-1200 is a parallel kinematic Delta robot engineered for ultra-high-speed pick-and-place, carton loading, blister packaging, and secondary sorting. With three high-torque direct-driven base motors and carbon-fiber composite parallel arms moving a lightweight titanium tool platform, it executes up to 180 picks per minute with sub-millimeter repeatable accuracy.
Addresses kinematic precision challenges by: Pick-and-place cycle rate: verify required takt time (e.g. 120 vs 180 picks/min) against motor RMS current.
Executes high-speed multi-axis kinematic manipulation, assembly, welding, or material handling tasks within structured automated cells.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS High-Speed Packaging Test Cell #4.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Rated Payload Capacity Verified | 3.0 | kg | At maximum 180 picks/min cycle |
Maximum Payload Capacity Verified | 6.0 | kg | At reduced acceleration (< 12 G) |
Working Envelope Diameter Verified | 1200 | mm | Cylindrical diameter at tool platform |
Working Envelope Height (Z) Verified | 350 | mm | Vertical travel range (450mm extended option) |
Maximum Cycle Rate Verified | 180 | picks/min | 25-300-25mm trajectory with 1kg payload |
Maximum Acceleration Verified | 15.0 | G | Equivalent to 150 m/s² peak acceleration |
Pose Repeatability (XYZ) Verified | ±0.05 | mm | At stabilized operating temperature |
Angular Repeatability (Theta Axis) Verified | ±0.02 | deg | With optional 4th rotational axis quill |
Total Delta Mechanism Weight Verified | 65.0 | kg | Excluding overhead mounting frame |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Pick & Place Robots.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Overhead Gantry Mounting Ring (Top-Mounted Suspension)
Inverted overhead mounting on rigid steel gantry structure only
3-Phase 380-480 VAC, 50/60 Hz (4.5 kVA)
Multi-axis servo controller cabinet with dynamic braking unit
Sync Cycle: 500 µs deterministic interpolation loop
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-PICK-AND-PLACE_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Pick & Place Robots.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration