
Collaborative Robots
Safe, lightweight collaborative robot with intuitive hand-guided teaching and joint torque sensing.

High-accuracy robotic assembly cell combining vision, force sensing, and automatic tool changing.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Assembly Robots, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-ROB-ASM-085 is an 850mm reach 6-axis robot engineered specifically for high-precision mechanical insertion, force-controlled fastener driving, and electronic sub-assembly. Featuring high-stiffness internal arm castings, minimal joint backlash, and native closed-loop 6-axis force-torque sensor integration, it achieves sub-20 micron pin-in-hole clearance insertions without jamming.
The IND-ROB-ASM-085 is an 850mm reach 6-axis robot engineered specifically for high-precision mechanical insertion, force-controlled fastener driving, and electronic sub-assembly. Featuring high-stiffness internal arm castings, minimal joint backlash, and native closed-loop 6-axis force-torque sensor integration, it achieves sub-20 micron pin-in-hole clearance insertions without jamming.
Addresses kinematic precision challenges by: Part tolerance clearance: verify if clearance is tight (< 50 µm) requiring force control.
Executes high-speed multi-axis kinematic manipulation, assembly, welding, or material handling tasks within structured automated cells.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Assembly Quality Lab Qual Rig #3.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Nominal Payload Capacity Verified | 7.0 | kg | Full dynamic speed |
Maximum Reach Radius Verified | 850 | mm | To wrist mounting face |
Pose Repeatability (ISO 9283) Verified | ±0.020 | mm | Stabilized room temperature |
Force Control Insertion Clearance Verified | 15 | µm | With active 6-axis wrist F/T search pattern |
Maximum TCP Speed Verified | 2400 | mm/s | Fast transfer between pick and insert |
Wrist Torque Rating (J4/J5) Verified | 18.5 | Nm | High-stiffness wrist reducers |
Total Robot Mass Verified | 48.0 | kg | Compact arm casting |
Cleanroom Compatibility Verified | ISO Class 5 (Fed Std 209E Class 100) | rating | With vacuum exhaust port connected |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Assembly Robots.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
ISO 9409-1-50-4-M6 Tool Flange
Floor mount, table-top mount, ceiling, or 45-degree angle mount
Single-Phase 200-240 VAC or 3-Phase 380-480 VAC (2.5 kVA)
RC-600 Controller with active force control firmware module
Sync Cycle: 500 µs force control loop rate
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-ASSEMBLY_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Assembly Robots.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration