
Planetary Reducers
Precision inline and right-angle planetary gearboxes for industrial automation machinery.

Industrial gearboxes delivering reliable torque transmission across factory automation equipment.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Industrial Gearboxes, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-RED-IND-220 is a right-angle servo gearbox combining high-precision spiral bevel gears with an inline planetary output stage. Designed for space-constrained industrial machinery requiring right-angle motor configuration, it delivers low backlash (< 2 arcmin), high thermal power capacity, and rugged cast-iron housing stiffness.
The IND-RED-IND-220 is a right-angle servo gearbox combining high-precision spiral bevel gears with an inline planetary output stage. Designed for space-constrained industrial machinery requiring right-angle motor configuration, it delivers low backlash (< 2 arcmin), high thermal power capacity, and rugged cast-iron housing stiffness.
Addresses kinematic precision challenges by: Thermal power capacity P_th vs actual motor mechanical throughput.
Serves as the high-precision torque-multiplication and motion-conversion core at robot joints, turntable positioners, and precision linear slides.
Kinematic speed reduction and torque multiplication via elastic flexspline deformation or multi-pin cycloidal eccentricity. Assigned to Robot Joint Articulation (J1 through J6) & Rotary Positioning Stages.
Motor input shaft delivers high rotational velocity (2,000 - 6,000 RPM) with low mechanical torque to the reducer input hub.
Input assembly continuously deflects flexible or cycloidal gear elements, causing simultaneous conjugate meshing across 30%+ of teeth without backlash.
Output cross-roller bearing delivers high continuous torque (Tau_out = Tau_in * ratio * efficiency) with sub-arcminute lost motion.
Zero mechanical backlash but requires significantly larger motor volume, higher continuous power, and active cooling to achieve equivalent joint torque.
Higher mechanical efficiency and shock capacity, but exhibits 1-3 arcmin backlash compared to true zero-backlash strain-wave units.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Heavy Industrial Drive Test Cell #6.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Reduction Ratios Available Verified | 6:1 to 150:1 | ratio | 2-stage (bevel + planetary) |
Nominal Output Torque Verified | 680.0 | Nm | At 1500 rpm input, S1 duty |
Peak Acceleration Torque Verified | 1350.0 | Nm | Cyclic reversing peak |
Emergency Stop Torque Verified | 2200.0 | Nm | Max 500 events over lifetime |
Torsional Backlash Verified | < 2.0 | arcmin | Class P1 standard (< 4 arcmin P2) |
Right-Angle Mechanical Efficiency Verified | ≥ 94% | % | At nominal operating temperature |
Max Input Speed Verified | 4500 | rpm | Continuous input 2500 rpm |
Shaft Configurations Verified | Solid Shaft / Hollow Bore with Shrink Disc | option | Keyed or smooth shaft |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Industrial Gearboxes.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Universal Flange or Foot Mount Housing (B5 / B14)
Universal mounting; sight glass and breather orientation configured per order
Passive mechanical gearbox; driven by servo or induction motor
Standard digital servo inverter
Sync Cycle: N/A
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-GEARBOXES_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Industrial Gearboxes.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration