
Drive Wheels
Traction wheel unit with integrated planetary gearbox and electromagnetic brake.

45-degree angled roller wheel enabling full holonomic movement on flat industrial floors.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Mecanum Wheels, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-WHL-MEC-204 is a heavy-duty industrial Mecanum wheel featuring peripheral rollers mounted at 45° to the wheel plane. By independently varying the speed and rotational direction of four Mecanum wheels on a chassis, the vehicle generates net force vectors in any horizontal direction—moving forward, sideways (strafing), diagonally, or spinning on its center point without steering linkages.
The IND-WHL-MEC-204 is a heavy-duty industrial Mecanum wheel featuring peripheral rollers mounted at 45° to the wheel plane. By independently varying the speed and rotational direction of four Mecanum wheels on a chassis, the vehicle generates net force vectors in any horizontal direction—moving forward, sideways (strafing), diagonally, or spinning on its center point without steering linkages.
Addresses kinematic precision challenges by: Four-point load distribution: uneven floors cause one wheel to lose traction; size assuming 3 wheels carry full vehicle load.
Executes high-speed multi-axis kinematic manipulation, assembly, welding, or material handling tasks within structured automated cells.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Omni-Platform Motion Analysis Test Bed #1.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Wheel Outer Diameter Verified | 203 | mm | Standard 8-inch industrial size |
Overall Wheel Width Verified | 85 | mm | Ground contact envelope |
Max Static Payload Verified | 650 | kg | At zero velocity |
Rated Dynamic Payload Verified | 400 | kg | At 1.5 m/s continuous rolling |
4-Wheel Chassis Payload Verified | 1200 | kg | Accounting for 3-point contact on imperfect floors |
Perimeter Roller Quantity Verified | 12 | rollers | Heavy-duty contoured rollers |
Roller Angle Verified | 45.0 | deg | Left and Right handed pair matching |
Roller Durometer Verified | 92 Shore A | hardness | High-grade cast polyurethane compound |
Axle Roller Bearings Verified | Dual Sealed Ball Bearings per Roller | bearing | 24 total bearings per wheel |
Maximum Vehicle Velocity Verified | 2.2 | m/s | With calibrated motor speeds |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Mecanum Wheels.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
6-Bolt Flange Interface (Ø70mm B.C.D) or Direct Keyed Hub
Must be installed in standard Mecanum 'X-pattern' or 'O-pattern' for valid kinematics
Passive mechanical wheel; requires 4x independent servo/BLDC motor drives
4-axis coordinated velocity control drive
Sync Cycle: 2 ms to 10 ms
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-MECANUM_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Mecanum Wheels.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration