
Drive Wheels
Traction wheel unit with integrated planetary gearbox and electromagnetic brake.

All-in-one traction, steering, reduction, and feedback unit for fast vehicle chassis integration.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Mobile Robot Modules, highlighting functional architecture, physical operating mechanisms, and deployment role.
The IND-MOD-SWR-300 is a dual-servo swerve drive module engineered for high-agility, heavy-payload automated guided vehicles and mobile manipulators. It provides independent 360° continuous steering orientation and independent traction power on a single polyurethane wheel hub, delivering the omnidirectional mobility of Mecanum wheels with the traction efficiency, obstacle climbing, and high payload capacity of conventional solid drive wheels.
The IND-MOD-SWR-300 is a dual-servo swerve drive module engineered for high-agility, heavy-payload automated guided vehicles and mobile manipulators. It provides independent 360° continuous steering orientation and independent traction power on a single polyurethane wheel hub, delivering the omnidirectional mobility of Mecanum wheels with the traction efficiency, obstacle climbing, and high payload capacity of conventional solid drive wheels.
Addresses kinematic precision challenges by: Vehicle total gross weight (payload + chassis + battery): 4 modules support up to 2400kg GVW.
Executes high-speed multi-axis kinematic manipulation, assembly, welding, or material handling tasks within structured automated cells.
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to INDUS Mobile Robotics Lab Qualification #7.
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Max Wheel Load Capacity Verified | 600 | kg | Dynamic rolling load at full speed |
Maximum Travel Velocity Verified | 2.5 | m/s | At 48 VDC bus voltage |
Continuous Traction Thrust Verified | 850 | N | Traction motor continuous S1 |
Peak Acceleration Thrust Verified | 1950 | N | Max duration 2.5s |
Steering Articulation Range Verified | 360° Continuous | deg | Integrated slip-ring free hollow steering bearing |
Steering Slew Rate Verified | 360 | deg/s | From zero to full 90° crab turn in 0.25s |
Steering Angular Repeatability Verified | ±0.05 | deg | With 19-bit steering absolute encoder |
Wheel Diameter x Width Verified | 160 x 60 | mm | 95A polyurethane tread |
Overall Module Height Verified | 215 | mm | Ultra-low chassis clearance envelope |
Module Total Mass Verified | 18.5 | kg | Including motors, gearboxes, and encoders |
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Mobile Robot Modules.
Environment: Industrial assembly, inspection, and robotic workcells
Eliminating cycle time bottlenecks and cumulative tolerance stack-up.
Integrates directly via standardized mechanical flanges and communication interfaces.
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Eliminates dimensional variance and structural backlash across all production lots.
Guarantees drop-in mechanical interchangeability and repeatable kinematic trajectories.
Resists torsional and bending deflection under dynamic acceleration cycles.
Prevents machine vibration chatter and protects sensitive end-of-arm tooling.
Enables plug-and-play communication and rapid electrical integration.
Cuts system commissioning time by up to 50% and simplifies diagnostic tracing.
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Top Chassis Mounting Flange (8-Bolt Circle)
Vertical top-mount bolting directly into AGV structural chassis frame
48 VDC nominal battery bus (36 VDC to 56 VDC operating)
Dual-axis low-voltage compact servo amplifier (EtherCAT / CANopen)
Sync Cycle: 1 ms deterministic update loop
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-MOBILE-MODULES_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Mobile Robot Modules.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration