
Linear Actuators
Precision guided linear motion module for controlled travel and repeatable positioning.

Evaluates emergency stop buttons, interlock switches, and light curtains for small standalone machines without a safety PLC.
Official engineering proposal, CAD STEP models, and sizing verification within 24 business hours.
Detailed mechatronic breakdown of Dual-Channel Safety Evaluation Relay with Force-Guided Contacts, highlighting functional architecture, physical operating mechanisms, and deployment role.
Evaluates emergency stop buttons, interlock switches, and light curtains for small standalone machines without a safety PLC.
Mechanically linked force-guided contacts (EN 50205 Type A); if a normally open contact welds closed, normally closed contacts cannot close.
Eliminates operational failure modes related to: Category 4 / PLe compliance, Manual monitored reset or automatic reset selection.
Monitors safety zones, prevents human-machine collisions, and ensures compliance with global industrial safety directives (ISO 13849-1).
Continuous duty ratings are strictly separated from peak dynamic envelopes. All parameters reflect verified laboratory data traceable to ISO 13849-1 / ISO 13849-2 · IEC 62061 · ISO 10218-1/2 (Industrial Robots) · ISO/TS 15066 (Cobots).
| Parameter | Specification Value | Unit | Notes & Test Conditions |
|---|---|---|---|
Contacts Verified | 3 Safe NO contacts + 1 Auxiliary NC contact | N | Audited per Relays with Forcibly Guided Contacts Standard EN 50205 |
Safety Rating Verified | PLe (ISO 13849-1) / SIL 3 (IEC 62061) | — | Audited per Relays with Forcibly Guided Contacts Standard EN 50205 |
Mechanical Life Verified | > 10 million cycles | — | Audited per Relays with Forcibly Guided Contacts Standard EN 50205 |
System Interface Compatibility Standard | Standard 24V AC/DC safety circuits | Standard | Supported physical and electronic mating connections |
Select a verified physical variant below to inspect continuous ratings, peak torque/force envelopes, and dimension comparisons.
Every application below reflects documented load capabilities, thermal equilibrium boundaries, and kinematics integration for Dual-Channel Safety Evaluation Relay with Force-Guided Contacts.
Environment: Automated production facilities and manufacturing cells
Demanding precision positioning and repeatability requirements under high-duty continuous operation.
Provides calibrated Dual-Channel Safety Evaluation Relay with Force-Guided Contacts performance adhering strictly to ISO 13849-1 / ISO 13849-2 · IEC 62061 · ISO 10218-1/2 (Industrial Robots) · ISO/TS 15066 (Cobots).
Environment: Automated production facilities and manufacturing cells
Demanding precision positioning and repeatability requirements under high-duty continuous operation.
Provides calibrated Dual-Channel Safety Evaluation Relay with Force-Guided Contacts performance adhering strictly to ISO 13849-1 / ISO 13849-2 · IEC 62061 · ISO 10218-1/2 (Industrial Robots) · ISO/TS 15066 (Cobots).
Environment: Automated production facilities and manufacturing cells
Demanding precision positioning and repeatability requirements under high-duty continuous operation.
Provides calibrated Dual-Channel Safety Evaluation Relay with Force-Guided Contacts performance adhering strictly to ISO 13849-1 / ISO 13849-2 · IEC 62061 · ISO 10218-1/2 (Industrial Robots) · ISO/TS 15066 (Cobots).
Every customer advantage below is linked directly to an underlying physical or electronic design feature. Operating boundaries and verification conditions are explicitly declared.
Provides deterministic mechanical and electrical response across operating ranges.
Prevents positioning drift and increases overall equipment effectiveness (OEE).
Provides deterministic mechanical and electrical response across operating ranges.
Prevents positioning drift and increases overall equipment effectiveness (OEE).
Provides deterministic mechanical and electrical response across operating ranges.
Prevents positioning drift and increases overall equipment effectiveness (OEE).
Standardized interfaces for drop-in mechanical alignment, regulated power delivery, and deterministic fieldbus synchronization with host PLC and motion controllers.
Standard 24V AC/DC safety circuits
Universal mounting in horizontal, vertical, or inverted orientations with precision dowel hole alignment.
48V DC Regulated Bus (24V–56V range)
Integrated field-oriented control or compatible with standard industrial AC/DC servo inverters.
Cycle Time ≤ 1.0 ms (Jitter < 1 µs)
Supports cyclic synchronized position (CSP), velocity (CSV), and torque (CST) operating modes.
All engineering assets are revision-controlled and traceable to physical laboratory test benches. Request calibrated files directly from our engineering desk without broken links.
IND-SAF-FORCE-GUIDED-SAFETY-RELAY_ASSEMBLY.STEPAudited Lab Specification
Accurate C.G. Matrix
Official Documentation
Direct answers to common engineering questions regarding sizing verification, mechanical tolerances, fieldbus integration, and documentation for Dual-Channel Safety Evaluation Relay with Force-Guided Contacts.
Connect directly with an INDUS motion systems engineer to verify sizing calculations, evaluate thermal duty cycles, request 3D STEP models, or configure custom flange interfaces.
• Official NDA protected technical evaluation
• 24 business hours standard proposal response
• Factory direct engineering support & CAD integration